50-PR518-12
50-PR518-1

AUTOMAX Ultimate Automatic Computerized Control Console

AUTOMAX PRO-M | EN Automatic Compression Tester for Cubes and Cylinders

AUTOMAX Ultimate Automatic Computerized Control Console

$8,000.00

In stock

$8,000.00

Today’s materials testing industry demands total accuracy and strict conformity to International Standards. Our AUTOMAX ULTIMATE  Automatic Computerized Control Console has been created to meet the demands of a 21st-century concrete, cement and steel testing control console should have.

SKU: SMND64777663769949 Categories: ,
  Ask a Question
Compare
Add to wishlist
Compare

HIGHLIGHTS

AUTOMAX PRO-M Power Control System is fitted with superior hydraulics. It can perform, in addition to standard failure tests, the Modulus of Elasticity Determination tests, Characterizations of Fiber Reinforced Concrete (FRC) under displacement-control and tensile tests on steel specimens.

AUTOMAX PRO-M uses LinkLAB, CONTROLS’ proprietary Laboratory Connectivity Package which allows your testing system to be a connected part of your laboratory infrastructure by taking inputs from any number of ancillary measuring systems and devices increasing efficiency and eliminating transposing errors.

The machines consist of:

Frame
Four column high stiffness welded frame tested for stability to EN 12390-4.
Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.

Compression platens
See table. Traceable certificate of surface hardness available on request.

Automax PRO-M, Automatic power and control system 
See technical specifications.

Safety features
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front door and rear transparent fragment guard.

FEATURES

  • Huge boost in efficiency and error elimination: LinK-LAB – Integrated testing station solution for seamless connection and data inputs from many ancillary devices for dimensional measurement, weight, bar code, etc.
  • Fully automatic – time saving: Full test-cycle automation maximizes productivity and ensures tests are performed accurately according to pre-set methods, eliminating operator variables.
  • Highly accurate and energy saving: Our DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
  • Intuitive, quick and simple operation: The integrated control system features an intuitive 7” color graphical display, which works like a tablet or smart-phone, and makes AUTOMAX PRO-M quick and simple to operate.
  • Standards compliant – peace of mind: Automatic performance of Elastic Modulus tests according to the main International Standards with automatic calculation of tests results.
  • Advanced: Allowing the execution of displacement-controlled tests on beams, notched beams, round or square slabs
  • Easy rebar testing: simply attach the stand- alone tensile frame and carry out rebar testing as well as all the compression tests.

SPECIFICATIONS

Hydraulics

  • DC motor, 720W, 50-60Hz
  • Maximum working pressure 700 bar
  • Load/unload electro-valve for test execution via display/PC and automatic stop at specimen failure
  • Active control of up to 4 frames by selection via display/PC (third and fourth frame as option). See accessories.
  • ES Energy Saving technology to reduce the power consumption and enable silent operation
  • Flow-sharing technology to perform loading and unloading cycles at controlled rate

Hardware

  • 524,000 points high-resolution/stability analog channels
  • 6 channels to be factory configured:
    • 2 channels for load sensors
    • 2 channels for load or displacement/strain sensor
    • 2 channels for displacement/strain sensors
  • Control frequency 250 Hz
  • Sampling frequency 250 Hz
  • 7”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
  • Unlimited storage capacity for test data on internal 16 GB SD card
  • USB port for test data storage on external USB memory stick and for firmware upgrade
  • Ethernet port for PC / Internet /network communication
  • Optional integrated graphic printer including Load-Time plot (for standard failure tests)
  • RS 232 port for data downloading in ASCII format

 

PHYSICAL SPECIFICATION TABLE

Model 50- C46F02/M
C46F04/M		 C56F02/M
C56F04/M		 C68F02/M
C68F04/M		 C78F02/M
C78F04/M
Capacity kN 2000 3000 4000 5000
Max vertical daylight ,
mm*		 350 350 520 520
Horizontal daylight
mm		 350 370 425 425
Max. piston travel*, mm 50 50 50 50
Platen dimensions 300 mm dia. 300 mm dia. 305×305 mm 305×305 mm
Platen surface hardness 55.5 HRC (600 HV) 55.5 HRC (600 HV) 55.5 HRC (600 HV) 55.5 HRC (600 HV)
Platens flatness toll. 0.03 mm 0.03 mm 0.03 mm 0.03 mm
Overall dimensions, mm 930x420x1530 1020x475x1550 1125x570x1555 1250x570x1555
Weight approx., kg 740 1105 2010 2010

*Use distance pieces conforming to the specimen size to avoid piston over travel

ACCESSORIES

Platens

50-C0050/HRD4
Supply of the compression machine with dia.300mm platens complete with traceable certificate of hardness of testing platens surfaces (upper and bottom platen certification included). Available only for ordering with compression machine.
50-C0050/HRD6
Supply of the compression machine with 305×305 mm platens complete with traceable certificate of hardness of testing platens surfaces (upper and bottom platen certification included). Available only for ordering with compression machine.

Calibration of Load Digital Readout Unit

50-C0050/CAL
Special calibration of load digital readout unit assuring class 1 from 1% of testing machine full scale (maximum load)

Firmware upgrade for advanced test execution

50-FW/DC
Firmware package to perform displacement-controlled tests with an AUTOMAX PRO-M compression tester.
50-FW/UTS
Firmware package to perform tensile tests on steel specimens with an AUTOMAX PRO-M control unit connected to suitable tensile frame.

PC Software

50-SW/DM
DATAMANAGER PC software compatible with DIGIMAX, PILOT, AUTOMAX, PILOT PRO, AUTOMAX PRO and PRO-M. Suitable for remote control of the system (except DIGIMAX), data acquisition, processing and filing. LAN cable included.
50-SW/DC
D-Control software package for energy absorption, displacement/strain controlled tests.
50-SW/EM
E-MODULE software package for Elastic modulus and Poisson ratio determination.
50-KLAB/E
LinK-LAB Enterprise laboratory connectivity package for machines controlled by PC via DATAMANAGER Software.

Printer

50-Q60P/PRINT
Upgrading the AUTOMAX PRO and PILOT PRO series to incorporate a serial graphic printer in the rear panel allowing load/time plot (printing available for languages with latin charcters only)

Distance Pieces

50-C9080/30
Distance piece dia.200x30mm complete with both central centering pin for simple stacking up and two screws for solid fixing.
50-C9080/50
Distance piece dia.200x50mm complete with both central centering pin for simple stacking up and two screws for solid fixing.
50-C9080/68
Distance piece dia.200x68mm complete with both central centering pin for simple stacking up and two screws for solid fixing.
50-C9080/100
Distance piece dia.200x100mm complete with both central centering pin for simple stacking up and two screws for solid fixing.
50-C9080
Distance piece dia 200 x 30 mm
50-C9082
Distance piece dia 200 x 50 mm
50-C9083
Distance piece dia 200 x 68 mm
50-C9086
Distance piece dia 200 x 100 mm.

Electronic Universal Extensometer / Compressometer

55-C0222/H
Electronic universal extensometer/compressometer for cylinders, prisms and cubes. Supplied with short distance piece for use with prisms 40 x 4 0x 160 mm and 2 elastic bands

Axial Compression Device

55-C0221/E
Axial compression device for cylinder dia.150x300mm complete with two high precision LDT displacement transducer 10mm travel
55-C0221/F
Axial compression device for cylinder dia.100x200mm complete with two high precision LDT displacement transducer 10mm travel

Extras and Upgrades

50-C69/FGH
Upgrading of the 50-C78xxx and 50-C68xxx series compression frames with metallic perforated  front door instead of standard transparent one.
50-C50/P1
Application of a magnetic switch to the safety guard (for automatic testers only). Suitable for automatic compression machines.
50-C50/EK
Cables securing the upper platen to the frame.

Third and Fourth Frame Facility

50-C10D/3F
Third frame facility for AUTOMAX series. Frame selection via display/PC.
50-C20E/4F
Fourth frame facility for AUTOMAX Multitest e and AUOTMAX PRO series. Frame selection via PC.
MODELS
50-C46F02/M
AUTOMAX PRO-M COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm and cubes up to 200mm. Suitable for ElasticModulus and Poisson ratio determination. Conforming to EN 12390-4, EN 12390-13. 230 V, 50-60 Hz, 1 Ph.
50-C46F04/M
AUTOMAX PRO-M COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm and cubes up to 200mm. Suitable for Elastic Modulus and Poisson ratio determination. Conforming to EN 12390-4, EN 12390-13. 110 V, 60 Hz, 1 Ph.
50-C56F02/M
AUTOMAX PRO-M COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm and cubes up to 200mm. Suitable for ElasticModulus and Poisson ratio determination. 230 V, 50-60 Hz, 1 Ph.
50-C56F04/M
AUTOMAX PRO-M COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm and cubes up to 200mm. Suitable for ElasticModulus and Poisson ratio determination. Conforming to EN 12390-4, EN 12390-13. 110 V, 60 Hz, 1 Ph.
50-C68F02/M
AUTOMAX PRO-M COMPACT-Line automatic compression machine, 4000 kN cap. for cylinders up to 250 x 500 mm and cubes up to 300mm. Suitable for Elastic Modulus and Poisson ratio determination. Conforming to EN 12390-4, EN 12390-13. 230 V, 50-60 Hz, 1 Ph.
50-C68F04/M
AUTOMAX PRO-M COMPACT-Line automatic compression machine, 4000 kN cap. for cylinders up to 250 x 500 mm and cubes up to 300mm. Suitable for Elastic Modulus and Poisson ratio determination. Conforming to EN 12390-4, EN 12390-13. 110 V, 60 Hz, 1 Ph.
50-C78F02/M
AUTOMAX PRO-M COMPACT-Line automatic compression machine, 5000 kN cap. for cylinders up to 250 x 500 mm and cubes up to 300mm. Suitable for Elastic Modulus and Poisson ratio determination. Conforming to EN 12390-4, EN 12390-13. 230 V, 50-60 Hz, 1 Ph.
50-C78F04/M
AUTOMAX PRO-M COMPACT-Line automatic compression machine, 5000 kN cap. for cylinders up to 250 x 500 mm and cubes up to 300mm. Suitable for Elastic Modulus and Poisson ratio determination. Conforming to EN 12390-4, EN 12390-13. 110 V, 60 Hz, 1 Ph.

General Inquiries

There are no inquiries yet.