- DESCRIPTION
- Description
- Store Policies
- Inquiries
HIGHLIGHTS
Vacuum pumps are used for a number of applications concerning, above all, De-Airing systems of water.
If water vapour is sucked by the vacuum pump and mixes with oil, producing an emulsion, it may cause serious damage to the pump if it is in a significant concentration. For this reason it is necessary to provide an adequate de-airing system as the Air drying unit 86-D2005 filled with the Silica gel (dessicator salt) 86-D0819.
Vacuum pumps can also be fit with a Vacuum gauge with pin regulating valve and bleed valve as our model 86-D2004/5 (see accessories) unless a similar gauge is not fit to the equipment to be connected as for example Large size pyknometer 75-D1122. For more detail about the de-airing systems see Additional information.
We propose two Vacuum pump models:
- 86-D2001 and 86-D2001/Z (110 V), for ultimate vacuum of 0.1 mbar
- 86-D2003 and 86-D2003/Z (110 V), for ultimate vacuum of 0.01 mbar
| Models 86- | D2001 D2001/Z |
D2003 D2003/Z |
| Free air displacement liter/min: | 75 | 75 |
| Ultimate vacuum mbar: | 0.1 | 0.01 |
| Power | 180 W | 240 W |
| Dimensions approx.: | 335x155x280 mm | 335x155x280 mm |
| Weight approx.: | 12,5 kg | 12,5 kg |
ACCESSORIES
Accessories and Spare Parts
General Inquiries
There are no inquiries yet.
