Axial-Circumferential Compression Device

The compressometer/extensometer for static Modulus of Elasticity and Poisson’s Ratio, as defined by ASTM C469, is a device for measuring the longitudinal strain and corresponding diametrical strain of dia. 150 x 300 mm (6″x12″) and dia. 100 x 200 mm (4×8″) concrete cylinders, or core, subjected to axial loading. It works by measuring the relative displacement of datum points on the cylinder surface.

The available models are:

• 55-C0221/D fitted with two digital gauges 25×0,001 mm.
• 55-C0221/E and 55-C0221/F fitted with two high precision displacement transducers LDT type, 0,001mm x 10mm.

The models fitted with displacement transducers can be connected to a suitable data logger or directly to our Automatic control consoles (as MCC or Automax Ultimate) which can provide cyclic loading and automatic determination of the Modulus of Elasticity.

The data logger  as, for example, our model 30-WF6008 with touch screen display 30-WF6008/T, can be  used with compression testers for axial deformation measurement when it’s not mandatory to perform loading / unloading cycles, but only loading ramps. In this case, one of the channel of the data logger should be used for the load signal coming from an additional pressure transducer with 3 way connector fitted to the compression tester. Please get in touch with our technicians for complete information and service.